Loading ...
Loading ...
Loading ...
Place the Stamina® Conversion II Recumbent Bike/Rower in the area where it will be used. It is
recommended that the Stamina® Conversion II Recumbent Bike/Rower be placed on an equipment
mat. The Stamina® Conversion II Recumbent Bike/Rower is approximately 77.8 inches long x 23
inches wide x 30.6 inches tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 8.5
feet long is required for safe operation of the Stamina® Conversion II Recumbent Bike/Rower. Make
sure that adequate space is available for access to and passage around the Stamina® Conversion II
Recumbent Bike/Rower.
LEVELING: Adjust the location of Stamina® Conversion II Recumbent Bike/Rower so the machine
sits on the oor without rocking.
MOVING: The Stamina® Conversion II Recumbent Bike/Rower has a pair of MOVING WHEELS
(76) on the FRONT STABILIZER(2). Grasp the RAIL CAP(55) to move the Stamina®
Conversion II Recumbent Bike/Rower.
FUNCTION INSPECTION:
Visually inspect the Stamina® Conversion II Recumbent Bike/Rower to verify that assembly is as
shown in the above illustration. Check the function of the Stamina® Conversion II Recumbent Bike/
Rower by turning the crank slowly through one complete revolution to verify that the drive train functions
properly. Adjust the TENSION KNOB(27) and verify that it functions properly.
CAUTION: Locate and read the WARNING LABEL(129) on the Stamina® Conversion II Recumbent
Bike/Rower. Make sure that all users read the WARNING LABEL(129) before using the
product.
SET UP INSTRUCTIONS
11
Equipment Mat
(not included)
Loading ...
Loading ...
Loading ...