Loading ...
Loading ...
Loading ...
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips
apply, visit "www.samsung,com," then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
iii iliii t iii i i 'iii i iiiii
Poor picture Eirst of all, please perform the Picture Test and confirm that your TV is properly displaying the test image.
(go to MENU - Support - Self Diagnosis - Picture Test) (p. 28)
Ifthe test image is properly displayed, the poor picture may be caused by the source or signal.
Tile TV image does not look as good as it • If you have an analog cable/satellite box, upgrade to an HD digital set top box. Use HDMI or
did in the store. Component cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel lineup.
• Antenna connection: Try HD stations after performing Auto program.
Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Sat box video output resolution to 1080i or 720p.
Tile picture is distorted: macro block error, • Compression of video contents may cause picture distortion, especially in fast moving pictures such
small block, dots, )ixelization. as sports and action movies.
• Low signal level carscause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (cca up to lm) may cause noise in picture on analog and digital
T_L
Color is wrong or missing. • If you're using Component connection, make sure tile component cables are connected to the
correct jacks. Incorrect or loose connections may cause color problems or a blank screen.
Ttlere is poor color or brightness. • Adjust the Picture options in the TV menu (go to Picture mode / Color / Brightness / Sharpness)
(p. 16)
• Adjust Energy Saving option in the TV menu (go to MENU - Picture - Eco Solution - Energy
Saving) (p. 16)
• Try resetting tile picture to view the default picture settings (go to MENU - Picture - Picture Reset)
(p. 22)
Ttlere is a dotted line on the edge of the • If the picture size is set to Screen Fit, change it to 16:9 (p. 18).
screen. • Change cable/satellite box resolution.
The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow)to the Green jack of
component input 1 on tile T_L
When changing channels, tile picture • If connected to a cable box, please try to reset it. (reconnect tile AC cord and wait until tile cable box
freezes or is distorted or delayed, reboots. It may take up to 20 minutes)
• Set the output resolution of tile cable box to 1080i or 720p.
Sound Problem Eirst of all, please Performthe Sound Test to confirm that your TV audio is properly operating.
(go to MENU 4Support _-Self Diagnosis" Sound Test)(p. 28)
Ifthe audio is OK, the sound problem may caused by the source or signal.
There is no sound or tlqesound istoo low • Pleasecheck tlqevolume of tlqedevice (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
at maximum volume.
Ttqepicture is good but tlqereis no sound.
Ttqespeakers are making an inappropriate
noise.
• Set the Speaker Select option to TV Speaker in the Sound menu (p. 23).
• if you are using an external device, make sure the audio cables areconnected to the correct audio
input jacks on the T_L
• if you are using an external device, check the device's audio output option (ex.you may need to
change your cable box's audio option to HDMI when you have a HDMI connected to your _.
• if you are using a DVI to HDMI cable, a separate audio cable is required.
• if your TV has a headphone jack, make sure there is nothing plugged into it.
• Reboot the connected device by reconnecting the device's power cable.
• Check cane connections. Make sure a video cable is not connected to an audio input.
• For antenna or Cable connections, check the signal strength. Low signal level maycause sound
distortion.
• Perform the Sound Test as explained above.
Eng,,sh6::[
Loading ...
Loading ...
Loading ...