Loading ...
Loading ...
Loading ...
Setting Surface Controls
Operating the Single Radiant Surface Elements
The 30" cooktop models has 4 single radiant surface elements and the
36" cooktop model has 5 single radiant surface elements.
To Operate the Single Radiant Surface Elements
1. Place correctly sized cookware on the radiant surface element.
2. Push in and turn the surface control knob in either direction to
the desired setting (Figure 4). Turn the knob to adjust the setting
if desired. Start most cooking operations on a higher setting and
then turn to a lower setting to finish cooking. Each surface element
provides a constant amount of heat at each setting. A glowing red
surface heating area extending beyond the bottom edge
of the cookware indicates the cookware is too small for the
surface heating area.
3. When cooking has completed, turn the surface control
knob to OFF before removing the cookware. Note: The Hot
Surface Indicator light wiii come on when the control knob
is turned on and will continue to glow until the glass cooktop
has cooled down to a moderate level that will not cause
burns if the area is touched. The light may remain on even
though the controls are turned OFF.
Note: See Table on page 7 for recommended control settings.
Figure 1
_ Radiant surface elements may appear to have
cooled after they have been turned off. A hot surface indicator
light will come on and will continue to glow until the glass
cooktop has cooled down to a moderate level. The glass surface
may still be hot and burns may occur if the glass surface is
touched before the indicator light has turned off.
Do not place plastic items such as saff and
pepper shakers, spoon holders or plastic wrappings on cooktop
when it is in use. These items could melt or ignite. Pothoiders,
towels or wooden spoons could catch fire if placed too close to
the surface elements.
Do not allow aluminum foil, or ANY material
that can melt to make contact with the ceramic glass cooktop.
If these items melt on the cooktop they will damage the ceramic
cooktop.
Using Turbo Boil TM Element
The Turbo BollTM feature offers a higher wattage surface radiant
element. Turbo Boil will bring food items to boil much quicker
and may be used when preparing larger quantities of food. The
cooktop graphics will be clearly marked with this feature.
Figure 2
J
Figure 3
8 7
HI
6
OFF • MED
LO
2
3
Figure 4
4
Loading ...
Loading ...
Loading ...