Loading ...
Loading ...
Loading ...
Setting Surface Controls
About the Ceramic Glass Cooktop
The ceramic cooktop has radiant surface elements
located below the surface of the glass. The design of the
ceramic cooktop outlines the area of the surface element
underneath. Make sure the diameter of the pan matches the
diameter of the element outline on the cooktop.
Heat is transferred up through the surface of the cooktop
to the cookware. Only flat-bottom cookware should be
used. The type and size of cookware, the number of surface
elements in use and their settings, are all factors that will
affect the amount of heat that will spread to areas beyond
the surface elements. The areas surrounding the elements
may become ho| enough fo cause burns.
About the Radiant Surface Elements
The element temperature rises gradually and evenly. As the
temperature rises, the element will glow red. To maintain
the selected setting, the element will cycle on and off:. The
heating element retains enough heat to provide a uniform
and consistent heat during the off: cycle. For energy emcient
cooking, turn off: the element several minutes before cooking
is complete. This will allow residual heat to complete the
cooking process.
Locations of the Radiant Surface Elements and
Controls
Your cooktop is equipped with radiant surface burners with
diferent wattage ratings. The ability to heat food quicker
and in larger volumes increases as the element wattage
increases.
The radiant surface elements are located on the model
790.4510 _ as follows:
* Two 6 inch radiant elements located at the left front and
right rear positions;
* Two 9 inch radiant elements located at the left rear and
right front positions.
The radiant surface elements are located on the model
790.4550 _ as follows:
* Two 6 inch radiant elements located at the left front and
right rear positions;
* One 9 inch Turbo Boll TM radiant element located at the
left rear position.
" One 12 inch radiant element located at the right front
position.
The radiant surface elements are located on the model
790.4530 _ as follows:
• Two 6 inch radiant elements located at the left front and
right rear positions;
• One 7 inch radiant element located at the center rear
position.
• One 9 inch Turbo Boll TM radiant element located at the
left rear position.
• One |2 inch radiant element located at the right front
position.
Location of the Radiant
Surface Elements and Controls
Model : 790.4510 _
Model : 790.4550 _
Model : 790.4530 _
NOTE: Please read detailed instructions for ceramic glass
cooktop cleaning in the General Care & Cleanlng section
and Before You Call checklist section of this Use and
Care Guide.
NOTE: Radiant elements have a iimiter that allows the
element to cycle on and off:, even at the HI setting. This
helps to prevent damage to the ceramic cooktop. Cycling
at the HI setting is normal and wiii mostly occur if the
cookware is too small for the radiant element or if the
cookware bottom is not fiat (For information concerning
cookware, refer to use proper cookware on page 7 of
this Use and Care Guide)
Loading ...
Loading ...
Loading ...