Loading ...
Loading ...
Loading ...
About the washer features.
NOTE:Features may not be available on all washer models,
Cycle Signal
Usethe SIGNAL button to change
the volume of the end of cycle signal.
Pressthe button until you reach
the desired volume.
Prewash (onsome models)
Prewashis an extra wash before
the main wash. Useit for heavily soiled
clothes or for clothes with a care label
that recommends prewashing before
washing. Be sure to add high-efficiency
detergent, or the proper wash additive
to the prewash dispenser.
NOTE:When selecting prewash,
it is recommended to use powder
detergent in the main wash !detergent)
compartment.
Extra Rinse
Usean extra rinsewhen additional rinsing
is desired to remove excessdirt and
detergent from soiled loads.
Delay Start
Youcan delay the start of a wash cycle
for 10-18 hours,depending on the model.
Pressthe DELAYSTARTbutton to choose
the number of hours you want to delay
the start of the cycle,then press the START
button. The machinewill count down and
start automatically at the correct time.
NOTE:If blouforget to fully closethe door,
a reminder signa!wi!! beep reminding you
to do so.
NOTE:If blouopen the door when the de!as
is counting down, the machine wil! enter
the pause state.You must dose the door
and pressSTARTagain in order to restart
the countdown.
Lock
You can lock the controls to prevent any
selectionsfrom being made. Or you can
lockthe controls after you have started
a cycle.
Children cannot accidenta!lbl start
the washer by touching pads with
this option selected.
To lockthe washer, press and hold
the DELAYSTARTbutton for 3 seconds.
To unlock the washer controls, press
and hold the DELAVSTARTbutton for
3 seconds.
The control lock icon on the display will
light up when it is on.
NOTE: The POWERbutton can stil! be
used when the machine is locked.
_oLo3SEC_'_
TO STORE
MY CYCLE (on some models)
Tosave a favoritecycle,setthe desired
settingsfor wash cycle,soillevel,spinspeed
andwash temp settingsand hold down the
MYCYCLEbutton for 5 seconds.A beepwill
soundto indicatethe cycle hasbeen saved.
To use your custom cycle, press the
MYCYCLEbutton before washing a load.
To change the saved cycle, set the desired
settings and hold down the MY CYCLE
button for 3 seconds.
NOTE: When using MY CYCLE,wash
options cannot be modified after the
cgcle has been started.
NOTE:If blou change wash options with
MY CYCLEbefore starting the cycle, the
MY CYCLElight wi!! turn off and Sou wi!!
be returned to the base cgcle.
8
BASKET CLEAN
BasketClean is a cycle that freshens up
the inside of your washer.The cycle uses
bleach or other available washing
machine cleaners and more water to
refresh your washer. UseBasketCleen
once every month to reduce odor and
residue buildup inside the washer.
For more information on BasketClean,
refer to the Careand Cleaningsection
on page 12.
Loading ...
Loading ...
Loading ...