Loading ...
Loading ...
Loading ...
07
7-57
Overtaking Acceleration Assist
Overtaking Acceleration Assist will
oper
ate when the turn signal indicator
is turned on to the left while Smart
Cruise Control is operating, and the
following conditions are satisfied:
ś Your vehicle speed is above 40 mph
(60 km/h)
ś The hazard warning flasher is off
ś A vehicle is detected in front of your
vehicle
ś Deceleration is not needed to
maintain distance with the vehicle in
front
WARNING
ś When the turn signal indicator is
turned on to the left while there is
a vehicle ahead, the vehicle may
accelerate temporarily. Pay attention
to the road conditions at all times.
ś Regardless of your countries driving
direction, Overtaking Acceleration
Assist will operate when the
conditions are satisfied. When
using the function in countries with
different driving direction, always
check the road conditions at all
times.
Smart Cruise Control Display and
Control
Basic function
You can see the status of the Smart
Cruise Control operation in the Driving
Assist mode on the cluster. Refer to “LCD
Display Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
OIK070043N
ś When operating
(1) Whether there is a vehicle ahead and
the selected distance level.
(2) Set speed.
(3) Whether there is a vehicle ahead and
the target vehicle distance.
Loading ...
Loading ...
Loading ...