Loading ...
Loading ...
Loading ...
37
To avoid any damage, the sandwich layer and adhesive must resist
heat.
INSTALLATION OF THE HOB:
1. Carry out the installation with at least two persons.
2. Cut out the installation opening as described on the drawing above (s. chapter
2.3 SELECTION OF INSTALLATION EQUIPMENT / DIMENSIONS // DIMENSIONS
OF THE INSTALLATION OPENING).
3. Check the seal for perfect fit and overall cover.
4. Fit the appliance into the installation opening. Start at the back by pressing the
back side of the appliance into proper position.
5. Now fit the right and left side.
6. Finally fit the front. Press it to the back of the installation opening first and then
press the front of the appliance into the installation opening. You may have to
apply some pressure at this step of installation so proceed with care!
7. Using a screwdriver, tighten the tension clamps
4
evenly starting at the centre
and moving diagonally until the built-in frame is tight on the worktop.
2.5 Electrical connection
DANGER! The appliance must be connected to the mains by a
qualified professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your electricity supplier.
Do not carry out the installation yourself. RISK OF ELECTRIC SHOCK!
DANGER! All electrical work must be carried out by a qualified
professional. Do not modify the energy supply. The connection must be
carried out in accordance with the current local and legal regulations.
RISK OF ELECTRIC SHOCK!
DANGER! Do not carry out the installation yourself. RISK OF
ELECTRIC SHOCK!
4
depending on model
Loading ...
Loading ...
Loading ...