Loading ...
Loading ...
Loading ...
Maintenance
CheckSafety InterlockSystem
1. Start the mower.
2. Releasethe blade control. The engine must stop within
3 seconds.
if the engine does not stop, do not use the mower. Bring the
mower to an authorizeddealer for service.
11.Start the engineand run for 2-3 minutes, to allow the
underside of the mower deck to dry.
Clean DebrisOff Mower
WARNING
DONOTattempt any maintenance,adjustments or service
with engine and blade running. STOPengine and blade.
Removestarter insert. Disconnect spark plug wire and
secure away from spark plug. Engine and components are
HOT.Avoid serious burns, allow sufficient time for all com-
ponents to cool. Wear heavy leather gloves when handling
or working around cutting blades. Blades are extremely
sharp and can cause severe injury.
1. Cleandirt and debris from the top of the mower deck.
2. Cleanany debris buildup on or around the engine, etc.
While cleaning, check components for wear or damage.
Replaceworn or damaged components immediately.
Figure17:Washoutport
WashoutPort
WARNING ,A
* Use appropriate eye protection.
, Keeppeople and pets out of the area.
, Stay behind the handlewhile the engine is running.
, Do not attempt mowing operations while using the
washout port.
, Do not attempt to look under or reach under the mower
deck for any reason while using the washout port.
Serious injury can result.
The washout port allows hands-free cleaning of the
underside of the mower deck. To use the washout port:
1. Be sure the grass bag and side discharge deflector are
removed.
2. Set the height of cut to the lowest position.
3. Move the mower to a level, paved surface.
4. Stop the engine.
5. Connect the male end of a standard garden hose to the
washout port connector (A, Figure 17).
6. Turn on the water supply to the garden hose.
7. Start the engine and run until no more debris emerges
from under the mower deck.
8. Stop the engine.
9. Turn off the water supply to the garden hose.
10.Disconnect the garden hose from the washout port
connector.
18 www.snapper.com
Loading ...
Loading ...
Loading ...