Loading ...
Loading ...
Loading ...
4. INTRODUCTION
4.1 SCOPE
This manual is intended to give an overview of the functioning and controls of this machine
to aid in it’s safe use.
4.2 SPECIFICATION
Stock no ............................................................................................................................. 87059
Part no ............................................................................................................................ PG252F
Engine type................................................................ 4 stroke overhead valve single cylinder
Displacement......................................................................................................................210cc
Rated power..................................................................................................................... 2.0kW
Peak power...................................................................................................................... 2.2kVA
Cooling system ........................................................................................................... Forced air
Regulation ..................................................................... AVR (Automatic Voltage Regulation)
Phase.................................................................................................................................. single
Output sockets .............................................................. 1 x 230V AC, 1 x 115V AC, 1 x 12V DC
DC output ..............................................................................................................................12V
Motor............................................................................................................210cc/7HP 4 stroke
Oil capacity ........................................................................................................................... 0.6L
Fuel...............................................................................................................................Unleaded
Engine oil................................................................................................................. SAE 10W 40
Fuel tank capacity ................................................................................................................ 3.6L
Noise level 4M ................................................................................................................95dB(A)
Dimensions .................................................................................................. 610 x 435 x 460mm
Weight (nett).......................................................................................................................36kg
4.3 HANDLING & STORAGE
CAUTION: Always use and store this generator correctly, never use or store this generator on
it’s side as oil or fuel may leak and damage the generator or your property.
If the generator has been used always allow it to cool for at least 30 minutes before
transporting the generator and ensure that the generator has fully cooled before returning
it to storage as a hot engine and exhaust system could cause personal injury or ignite some
materials.
To prevent fuel/oil spillage when transporting, the generator should be secured upright in
it’s normal operating position with the engine switch in the off position.
Take care not to drop or strike the generator when transporting. Never cover the generator
when in use.
Before storing the generator for a long period:-
1. Be sure that the storage area is free of excessive humidity and dust.
2. Drain the fuel, storage procedure below.
A. Unscrew the fuel tank cap, remove the filter screen and empty the fuel tank into an
approved petrol container using a commercially available hand siphon
(Draper Stock No.43650), re-install the filter screen and fuel tank cap.
B. Loosen the carburettor drain screw and drain the carburettor into a suitable container.
C. Remove the spark plug maintenance cover and remove the spark plug cap.
D. Turn the engine switch to the OFF position.
E. Pull the starter cord 3 or 4 times to empty the fuel pump of petrol, into a
suitable container.
F. Turn the engine switch to the OFF position and tighten the carburettor drain screw.
5
Loading ...
Loading ...
Loading ...