580752630 User Manual

Loading ...

SelectmagentajetsoapPrecisionSprayTM nozzleto

launch soap to second story siding and windows.

JET SOAP

Select black fan soap PrecisionSprayTM nozzle for

general cleaning. Greatfor applying soap to

vehicles, boats, driveways, decks, and patios.

FAN SOAP

3. Pull backon collar,insert new PrecisionSprayTM nozzle

and releasecollar.Tug on nozzleto makesure it is securely

in place.

UsageTips

* For most effective cleaning, keep PrecisionSprayTM nozzle

from 8 to 24 inches (20 to 61 cm) away from cleaning

surface.

* If you get PrecisionSprayTM nozzletoo close, especially

using a high pressure nozzle,you may damage surface

being cleaned.

* DONOTget closer than 6 inches (15 cm) when cleaning

tires.

2-m-I SoapSystem

_i, WARNING Chemical Burn Hazard.

i_ Chemicalscould cause bodily injury, property

damage or death.

• DONOTusecausticliquid with pressurewasher.

• UseONLYpressurewashersafedetergents/soaps.Followall

manufacturersinstructions.

CleaningandApplyingDetergentwith the

Project Pro® PerfectMixTM Siphon

To apply undiluted detergent using the blue

PerfectMWMsiphon, follow these steps:

1. Review use of PrecisionSprayTM nozzles.

2. Attach PerfectMWMsiphon hose to pump

and PerfectMWMconcentrate bottle.

NOTICE Contact with the hot muffler can damage detergent

siphoning tube.

• When inserting the siphon into a detergent solution bottle, route

the tube so as to keep it from inadvertently contacting the hot

muffler.

3. Makesure fan soap (black) or jet soap nozzle(magenta)

is installed.

NOTICE Detergentcannot be applied with the high pressure

nozzles(Cyan, Orangeor Red).

4. Makesure garden hose is connected to water inlet.

Checkthat high pressure hose is connected to spray gun

and pump. Turn on water.

NOTICE You must attach all hoses before you start the

engine.

• Starting the engine without all the hoses connected and without

the water turned ONwill damage the pump.

• Damageto equipment resulting from failure to follow this

instruction will void warranty.

5. Start engine following instructions How to Start Your

Pressure Washer.

6. Apply detergentto a dry surface, starting at lower

portion of areato be washed and work upward, using

long, even, overlapping strokes.

7. Allow detergent to "soakin" for 3-5 minutes before

washing and rinsing. Reapply as neededto prevent

surface from drying. DO NOT allow detergent to dry on

(prevents streaking).

Cleaningand ApplyingDetergentwith __

the StandardClear Siphon

To apply diluted detergent using the

standard clear siphon tube, follow these

steps:

1. Review use of PrecisionSprayTM nozzles.

2. Attach clear siphon hose to barbedfitting on pump.

3. Mix detergent solution as required by job.

4. Placesmall filter end of clear siphoning tube into

container with diluted solution as described above.

NOTICE DO NOTinsert standard siphon hose in Extreme

Concentrate.Failure to dilute concentratewill cause excessive

application and consumption of solution.

NOTICE Makesure the filter is fully submerged in fluid

while applying solution.