Loading ...
Loading ...
Loading ...
Framed cooktops
63
Installation
Preparing the counter
Cr
eate the counter cut-out as shown
in the cooktop diagram and in the de‐
tailed drawing. Remember to main‐
tain a minimum safety distance (see
"Safety clearances").
Seal an
y wooden counter surfaces
with a special varnish, silicone rub‐
ber, or resin to help prevent swelling
from moisture. The sealant must be
temperature resistant.
Ensure that the sealant does not get
on
the top surface of the countertop.
The sealing tape guarantees a non-
slipping seat of the co
oktop in the
cut-out. The gap between the frame
and counter reduces with time.
Installing the cooktop
F
eed the appliance power cord down
through the counter cut-out.
Cen
ter the cooktop in the cut-out.
Make sure that the seal under the
cooktop sits flush with the counter on
all sides. This is important to ensure
an effective seal.
NEVER seal the cooktop using addi‐
tio
nal sealing material such as sili‐
con!
If during installation the seal around
the fr
ame does not sit flush with the
countertop in the corners, the corner
radius, maximum 3/16" (4 mm), can
be carefully filed down to fit.
Co
nnect the cooktop to the electrical
power supply.
Che
ck that the cooktop works.
Loading ...
Loading ...
Loading ...