Loading ...
Loading ...
Loading ...
5
ENGLISH
Attaching Spray Wand (Fig. G)
1. To connect the spray wand
2
to the spray handle
3
,
insert the end of the spray wand inside the spray handle.
2. Press in and turn the spray wand counterclockwise to
lock it into position.
Attaching High Pressure Hose (Fig. H-J)
NOTICE: Never pull water supply hose to move
pressure washer. This could damage hose and/or
pumpinlet.
To connect the high pressure hose
1
to the spray
handle
3
, screw the hose collar
32
onto the inlet
coupler
33
.
To connect the high pressure hose to the pressure washer
unit
7
, screw the hose collar
32
onto the high pressure
water outlet
34
.
NOTE: Uncoil the high pressure hose before installation to
preventkinks.
NOTE: Avoid cross threading when installing the hose. Cross
threading will causeleaks.
Fig.G
23
Assemble High Pressure Hose Storage (Fig. F)
1. To assemble the high pressure hose storage
18
, place
the detents
19
in position underneath the cross
member
25
as shown in Fig.F.
2. After the detents are installed, snap the lower end of the
hose storage into place.
in Fig. D to the axle pin
21
until it snaps into place.
NOTE: Follow this process for left and right wheels.
3. Ensure wheels
20
are fully secured to the
axle bracket
23
.
Fig.D
20
23
7
24
21
22
Assemble Crossmember and Spray Handle
Storage Hook (Fig. E)
Your pressure washer is not fully assembled in the carton.
1. To assemble the crossmember
25
to the frame
handle
15
, align the four screw tabs
26
on the back
of the crossmember with the with the four slots
27
in the frame handle and place the crossmember
25
onto the frame handle
15
.
2. Insert the four retaining screws
28
through the frame
handle
15
and use a screwdriver to fully tighten the
screws.
Ensure the crossmember is fully secured to the
frame handle.
3. To assemble the spray handle storage hook
29
to the
frame handle
15
, align the two screw tabs
30
on the
back of the spray handle storage hook
29
with the two
slots
31
in the frame handle and place the spray handle
storage hook
29
onto the frame handle
15
.
4. Insert the two retaining screws
28
through the frame
handle
15
and use a screwdriver to fully tighten the
screws.
Ensure the
spray handle storage hook
is fully
secured to the frame handle.
Fig.E
15
29
30
26
27
27
28
31
Fig.F
18
19
25
Loading ...
Loading ...
Loading ...