Loading ...
Loading ...
Loading ...
ENGLISH
8
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performingthisprocedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into aliquid.
Nozzle (Fig. A, K)
If the nozzle becomes clogged with foreign materials, such as
dirt, excessive pressure may develop. If the nozzle becomes
partially clogged or restricted, the pump pressure will pulsate.
Clean the nozzle immediately using the nozzlecleaner.
1. Shut OFF the pressure washer unit
7
and turn OFF the
watersupply.
2. Pull trigger
6
on spray handle
3
to relieve any
waterpressure.
3. Remove the nozzle from the spray wand
2
by pulling
the quick connect collar
36
toward the spraywand.
4. Using the spray tip cleaning tool
14
, unclog any debris
from thenozzle.
5. Run water from a faucet or garden hose through thenozzle.
Soap Tank (Fig. A, N)
To clean the soap tank, decouple the hose from the pump.
1. Shut OFF the pressure washer and turn OFF the
watersupply.
2. Pull trigger on spray handle to relieve any waterpressure.
Fig.N
37
38
Accessories
WARNING: Since accessories, other than those
offered by CRAFTSMAN, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
CRAFTSMAN recommended accessories should be
used with thisproduct.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN call 1-888-331-4569.
Repairs
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including power cord repairs, and brush inspection
and replacement, when applicable) should be
performed by a CRAFTSMAN factory service center or
a CRAFTSMAN authorized service center. Always use
identical replacementparts.
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of an
insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
• FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
• Register online at www.craftsman.com/registration
Storage (Fig. M)
• Store in a dry, covered location above freezing
temperature. STORE INDOORS.
• Always completetely empty water from high pressure
hose, pressure washer unit, spray wand, nozzles, soap
tank, and spray wand.
• Nozzles can be stored on the cross member as shown
in Fig.M.
Fig. M
3. Decouple the soap tank hose
37
from the soap tank
hose inlet
38
.
4. To clean the soap tank
11
, empty any remaining
detergent back into its bottle. Use water from a garden
hose to thoroughly rinse out the tank. Empty the tank
and allow it to dry.
Loading ...
Loading ...
Loading ...