Loading ...
Loading ...
Loading ...
16 www.westinghouse.com.au / www.westinghouse.co.nz
This setting permits you to either enable
or disable the buzzer at the end of the
program. As an example, you might wish
to disable this buzzer when you start a
wash when going to bed, so that when
the wash finishes approximately 1 hour
later, it will not disturb you through the
night.
Error warning beeps such as critical
faults are not disabled.
Enabling/Disabling End-Of-Wash
Buzzer
To disable the buzzer sound, press
“Water Level” and “Temp” touchpads
at the same time about 3 seconds,
the icon “ ” will show on display
along with buzzer sound.
To return to default configuration press
these two touchpads at the same time
about 3 seconds, the icon “ ” will
show on display along with buzzer
sound.
●
●
–
–
Child Safety Lock ( ) Option
Your appliance is provided with CHILD
SAFETY LOCK which permits you to leave
the appliance unsupervised with the door
closed without having to worry that children
might be injured by or cause damage to
the appliance.
Set this option AFTER pressing the
Start/Pause touchpad.
To activate the function, press and
hold “Lock ” touchpad about
2 seconds until the display shows the
icon “ ”.
To set “Child Lock” option:
To deactivate the function, press and hold
this touchpad again until the icon “ ” in
the display disappears.
You must deactivate the function
before operating the washing
machine.
All the touchpads are locked.
●
●
If you press any touchpad while
Child Lock is activated, the icon
“ ” and “ ” will flash on
display 3 times along with buzzer
sound.
To start the selected program, press
the “Start/Pause” touchpad.
If you have started your wash and you
wish to stop it for some reason, press
the “Start/Pause” touchpad to enter
PAUSE mode
Start/Pause Touchpad
To restart the program from the point at
which it was interrupted, press the
“Start/Pause” again.
If the lid is opened during
operation, the machine will go
into PAUSE mode and display
show “ ”.
After closing the lid press
Start/Pause touchpad on the
control panel to restart the
program.
3.5 Settings
Loading ...
Loading ...
Loading ...