Loading ...
Loading ...
Loading ...
14
EEE
14
E
14
E
Operation
Manual Operation
14
Suppose you want to defrost for 5 minutes at 30%.
PROCEDURE DISPLAY
1. Enter defrost time.
5:00
2. Touch Power Level pad eight times
or hold down until the desired power
appears.
30
PERCENT
3. Touch Start/Touch On pad.
5:00
COOK
4. When the defrost time is complete,
a long tone will sound and
END
will
appear in the display.
END
MANUAL DEFROST
If the food that you wish to defrost is not listed on the
Super Defrost and Auto Charts or is above or below the
limits in the “Amount” column on the Super Defrost
and Auto Defrost Charts (pages 24 and 25), you need to
defrost manually.
You can defrost any frozen food, either raw or previously
cooked, by using Power Level 3. Follow the exact 4-step
procedure found under To Set Power Level. Estimate
defrosting time and press Power Level eight times for
30% power.
For either raw or previously cooked frozen food the
rule of thumb is approximately 4 minutes per pound.
For example, defrost 4 minutes for 1 pound of frozen
spaghetti sauce.
Always stop the microwave oven periodically to remove
or separate the portions that are defrosted. If food is not
defrosted at the end of the estimated defrosting time,
program the microwave oven in 1 minute increments at
30% until totally defrosted.
When using plastic containers from the freezer, defrost
only long enough to remove from the plastic in order to
place in a microwave-safe dish.
TIME COOKING
Your microwave oven can be programmed for 99 minutes
and 99 seconds (99.99). Always enter the seconds after
the minutes, even if they are both zeros.
Suppose you want to cook for 5 minutes at 100%.
PROCEDURE DISPLAY
1. Enter cooking time.
5:00
2. Touch Start/Touch On pad.
5:00
COOK
TO SET POWER LEVEL
There are eleven preset power levels.
Using lower power levels increases the cooking time which
is recommended for foods such as cheese, milk and long
slow cooking of meats. Consult cookbook or recipes for
specific recommendations.
TOUCH POWER
LEVEL PAD NUMBER
OF TIMES FOR
DESIRED POWER
APPROXIMATE
PERCENTAGE
OF POWER
COMMON
WORDS FOR
POWER LEVELS
Power Level x 1 100% High
Power Level x 2 90%
Power Level x 3 80%
Power Level x 4 70% Medium High
Power Level x 5 60%
Power Level x 6 50% Medium
Power Level x 7 40%
Power Level x 8 30% Med Low/
Defrost
Power Level x 9 20%
Power Level x 10 10% Low
Power Level x 11 0%
Loading ...
Loading ...
Loading ...