Loading ...
Loading ...
Loading ...
,_IkCAUTION: Before performing any service or adjustments:
o Depress clutch/brakepedal fully and set parking brake.
,, Place gearshiftlever in neutral(N) position.
o Place attachment clutch in =DISENGAGED" position.
° Turn ignitionkey =OFF" and remove key.
o Make sure the blades and all movingparts have completelystopped.
o Disconnectspark plugwire from spark plug and place wire where itcannot come
in contactwith plug.
TO REMOVE MOWER
Mower will be easier to remove from the
right side of tractor.
o Place attachment clutch in "DISEN-
GAGED" position.
° Move attachment lift lever forward to
lower mower to its lowestposition.
• Roll belt off engine pulley.
° Disconnectclutch rod from clutch lever
by removing retainer spring.
° Disconnectanti-swaybar from chassis
bracket by removing retainer spring.
o Disconnectsuspensionarms from rear
deck brackets by removing retainer
springs.
o Disconnect front links from deck by
removing retainer springs.
• Raise lift lever to raise suspension
arms. Slide mower out from under trac-
tor.
IMPORTANT= If an attachment other than
the mower deck is to be mounted on the
tractor, remove the front links.
TO INSTALL MOWER
o Raise attachment lift lever to its highest
position.
o Slide mower under tractor with dis-
charge guard to right side of tractor.
° Lower lift lever to its lowest position.
o Install mower in reverse order of
removal instructions.
Clutch
Clutch
Retainer
Spring
Suspension
Arms
Engine Pulley
Front
Link
_rSprings
(BothSides)
Retainer
Spring
Anti-Swaybar
Springs
(Both Sides)
21
Loading ...
Loading ...
Loading ...