Loading ...
Loading ...
Loading ...
Positioning
The edges of the hob must be a minimum distance of mm from side walls
and mm from rear wall.
700 mm between the highest point of the hob surface (including the burners)
and the underside of any horizontal surface directly above it.
mm between the hob surfaces, providing that the underside of the
horizontal surface is in line with the outer edge of the hob. If the underside of
the horizontal surface is lower than 400 mm, then it must be at least 50 mm
away from the outer edges of the hob.
50 mm clearance around the appliance and between the hob surface and any
combustible materials.
45 mm
You must have a gap of at least 25 mm and at most 74 mm between
the underneath of the appliance and any surface that is below it.
o
o
o
o
o
This aliance is to e uilt into a itchen unit or mm ortoroiding
the folloing minium distances are alloed
CLEARANCES REQUIRED
WHEN FITTING WITH A
COOKER HOOD
300mm cooker hood
700mm
400mm
400mm
60mm
480mm
Loading ...
Loading ...
Loading ...