Loading ...
Loading ...
Loading ...
ow to se the appliance
Automatic ignition with flame failure safety device
The appliance is fitted with a flame failure safety device on each burner, which
is designed to stop the flow of gas to the burner head in the event of the flame
going out.
To ignite a burner:
o Press in the control knob of the burner that you wish to light and turnit
anti-clockwise to the maximum position.
o If you keep the control knob depressed, the automatic ignition forthe
burner will operate.
o
o After this 15-second interval, to regulate the flame you should continue
turning the control knob anti-clockwise until the flame is at a suitable level.
The operating position MUST be at a position between the maximum and
minimum position.
o
To switch the burner off, turn the control knob fully clockwise to the gas
offposition.
o In case of power failure, the burners can be lit by carefully using a match.
11
ou should hold down the control knob for seconds after the flame on
the burner has lit. If after s the burner has not lit stop operating the
device and open the compartment door andor wait at least min before
attempting a further ignition of the burner.
Loading ...
Loading ...
Loading ...