Loading ...
Loading ...
Loading ...
27
• Clean the inside of the appliance and equipment
parts with lukewarm water and a little detergent.
IMPORTANT
Do not use abrasive or scouring pads or sponges.
Do not use concentrated cleaning agents. Never
use abrasive or acid-based cleaners or chemical
solvents.
• Clean the pull-out
rails with a slightly
dampened cloth
only.
IMPORTANT
No cleaning water
must be allowed to
get into the pull-out
rail guides.
• Dry all parts well
with a cloth.
• Do not damage or remove the model plate on the
inside of the appliance. It is very important for servic-
ing your appliance.
• Install the drawers.
Place the drawer on
the rails. The rails
must be fully extended
and aligned with the
front of the drawer.
Slide the drawer in.
• Install all equipment parts and replace the food in the
appliance. Refer to chapter „Equipment“.
• Turn the appliance on.
Cleaning
WARNING!WARNING!
• To prevent possible injury due to an electric
shock, be sure to disconnect the power cord
or turn off the circuit breaker before cleaning
the appliance.
• To avoid injury or damage, do not use steam
cleaning equipment to clean the appliance.
• To avoid short-circuits, ensure no cleaning
water penetrates into the electrical
components when cleaning the appliance.
Do not use a sponge or cloth that is overly
wet.
• Take food out of the appliance and store it in a cool
place.
• Rinse or flush the water system after 5 days if it has
not been used, see „Maintenance Menu“.
• Remove the glass shelves and door racks. Refer to
chapter „Equipment“.
• Remove the drawers.
Pull the drawer
straight out, grip at the
back and lift out.
• Pull the freezer drawer
upwards by its right and
left bottom corners (1).
Push the container
backwards (2). Set the
container to an angle and
remove it (3).
• The bottommost freezer
drawer must be removed
to clean the glass plate in
the freezer compartment.
C
leaning
Loading ...
Loading ...
Loading ...