Loading ...
Loading ...
Loading ...
www.linarie.com.au
Unit is in (mm)
cont. installation
6
Cabinet measurement Requirements (illustrated above):
1) Cabinet's lenght is 566-580mm. Minimum distance.
2) Cabinet's height is 365-380mm. Minimum distance.
3) Cabinet's depth should be no less than 550mm.
4) Outside dimension of cabinet should be no less than
596mm, as the frame length is 592mm.
5) Cabinet's board less than 15mm or 20mm thick.
100
100
450
550
365-380
important
size
566-580
important
size
4.4 Frame installation procedure
4.3 Cabinetry
MICROWAVE LOCATION
vent
vent
100
550
Open the microwave oven,
fix with 4x45 screw and add screw
cover.
Put the microwave oven into the cabinet and keep
the microwave oven in a horizontal direction while
maintaining the edge distance.
Fix the oven to the cabinet using 2 3x30mm screw.
Refer to image below.
1)
2)
3)
4x45mm
Screw cover
3x30mm
FRONT
Brown
220~240V/ 50Hz
Blue
Yellow-Green
The wires in this mains lead are coloured in accordance
with the following code:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains leads of the appliance
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected
to the terminal in the plug which is marked with the letter E or
by the earth symbol coloured green of green-and-yellow.
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
Loading ...
Loading ...
Loading ...