Loading ...
Loading ...
Loading ...
www.linarie.com.au
Power consumption
Output
Operating Frequency
Outside Dimensions
Oven Cavity Dimensions
Oven Capacity
Uncrated Weight
The oven light will turn on during cooking and also when
the door is opened.
To reduce the risk of fire in the oven cavity:
Placement of Oven
[only applicable for built-in models]
Circuits
Make sure all the packing materials are removed from
inside the door.
Inspect the oven after unpacking for any visual damage.
If any of the following are visible, DO NOT use the oven:
- Misaligned door, damaged door, dents or holes in door
window and screen dents in cavity.
Microwave ovens should not be built into a unit directly
above a top front venting conventional cooker.
This may be a safety hazard and could result in damage
to your oven. This will invalidate your two year guarantee.
A microwave which is built in must be more than 850mm
above floor level. It is recommended that the microwave
oven is placed below a conventional oven to avoid heat
damage to the facia of the microwave.
The oven must be placed on a flat, stable surface.
For correct operation, the oven must have sufficient air
flow. Allow 15 cm of space on the top of the oven, 10cm
at the back, and 5 cm on both sides. If one side of the
oven is placed flush to wall, the other side or top must
not be blocked. Do not remove the feet.
220-240V~50Hz,1080W
700W
2,450MHz
592mm(W) X 313mm(D)
X 376mm(H)
315mm(W) X 296mm(D)
X 211mm(H)
20 litres
Approx. 13.3kg
3. TECHNICAL DATA SHEET
3.1 Specification 3.2 Features
5
Parameter Value
Door Safety
Lock System
Door Safety
Lock System
Oven Window
Control panel
This appliance is only suitable for cooking food. Do not use it for other purposes, i.e. for storage
purposes. Otherwise, it might lead to damage to the appliance or personal injury.
4. INSTALLATION
Our oven should be operated on a separate 10A circuit from
other appliances. Failure to do this may cause the power
board fuse to blow, and/or food to cook slower. Do not
insert higher value fuse in the power board.
4.1 Components
1 pc screw cover
1 pc screw 4x45mm
FRONT
2 pcs screw 3x30mm
Oven
Cabinetry
4.2 Trim kit specification
Cavity dimensions
Width 566-580mm
Height 365-380mm
Depth 550mm
Frame dimensions
Width 592mm
Height 390mm
Depth 20mm
FLATWAVE TECHNOLOGY
Allow the flat table to cool before cleaning.
Do not cook directly on the flat table. Always put the
food in the container special for the microwave oven.
Loading ...
Loading ...
Loading ...