Loading ...
SECTION PAGE
Warranty ................................................... 2
Product Specifications .............................. 2
Safety Guidelines - Definition ................... 3
Power Tool Safety ..................................... 4
Drill Press Safety ...................................... 6
Electrical Requirements And Safety .......... 8
Accessories And Attachments ................... 9
Tools Needed For Assembly ..................... 9
Carton Contents ........................................ 9
SECTION PAGE
Know Your Drill Press ................................ 11
Glossary Of Terms .................................... 12
Assembly And Adjustments ....................... 13
Operation .................................................. 19
Maintenaince ............................................. 23
Troubleshooting Guide .............................. 24
Parts List ................................................... 25
Repair Protection Agreements .................. 27
CRAFTSMAN FULL WARRANTY
If this Craftsman product fails due to a manufacturer's defect in material or workmanship with one year from the
date of purchase, return it to any Sears store, Sears Parts & Repair Service Center, or other Craftsman outlet
in the United States for free free repair ( or replacement if repair proves impossible). This warranty does not
include expendable parts such as saw blades which can wear out from normal use within the warranty period.
This warranty applies for only 90 days from the date of purchase if this product is ever used for commercial or
rental purposes. This warranty gives you special legal rights, and you may also have other rights which vary
from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
,_kWARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
- Lead from lead-based paints,
- Crystalline silica from bricks and cement and other masonry products, and
- Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles. Avoid prolonged contact
with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective
clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on
the skin may promote absorption of harmful chemicals.
Chuck size ..........................................................................
Speed ..................................................................................
Motor ...................................................................................
Horsepower .........................................................................
Table Size ............................................................................
Table tilt ...............................................................................
Spindle travel .......................................................................
Throat ..................................................................................
Laser guide ..........................................................................
, WARNING
1/2 in.
5 (620-3100 RPM)
6.0 A, 120 V, 60 Hz
2/3 HP (Max. Developed)
7-5/8 in. x 6-1/2 in.
45 ° Right or Left
2 in.
5 in.
YES
To avoid electrical hazards, fire hazards or damages to the tool, use proper circuit protection.This tool is wired
at the factory for 110-120 Volt operation. It must be connected to a 110-120 Volt / 6 Ampere
time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately. If it is worn, cut or
damaged in any way.Before using your tool, it is critical that you read and understand these safety rules. Failure
to follow these
rules could result inserious injury to you or damage to the tool.
2
2010/10
Loading ...
Loading ...
Loading ...