Loading ...
Loading ...
Loading ...
Always follow all safety precautions when performing maintenance to the PowerMate.
,_ WARNING
ElectricalShockOr PersonalInjury Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure todo so
could resultin electrical shockor personal
injury from vacuum cleaner suddenly
starting.
BELTCHANGING AND AGITATOR CLEANING
TO REMOVE BELT
1. Remove floor
brush from the
Screws
PowerMate.
2. Turn PowerMate
upside down and
remove three (3)
screws.
3. TurnPowerMate
right side up.
4. Loosen the rear
latches located
below the pedals.
5. Toremove
cove_ grasp
the side latches
and pull out.
6. Unscrew two (2)
agitator cover
screws and remove
agitator cover.
7. Lift agitator
assembly out
and remove
worn belt.
8. Check and clean end cap areas. See
AGITATOR ASSEMBLY(page 23) for picture
of complete agitator assembly.
- 22 -
Loading ...
Loading ...
Loading ...