Loading ...
Loading ...
Loading ...
,_ WARNING
Personal Injury Hazard
Always turn off and unplug the vacuum
cleaner before cleaning the agitator area
as agitator may suddenly restart. Failure
todo socan resultin personalinjury.
OVERLOAD PROTECTOR
The PowerMate has built-in protection
against motor and belt damage shouldthe
agitator jam. If the agitator slows clown or
stops, the overload protector shuts off the
PowerMate. The canister motor will continue
to run.
Tocorrect problem: Turn off and unplug
vacuum cleaner, remove obstruction, then
press OVERLOAD PROTECTOR RESET
button.
If the problem persists,have the vacuum
cleaner serviced by a Sears or other
qualified service agent.
ELECTRONIC SUCTION CONTROL
The electronic suction control allows you to
change the power of the vacuum cleaner
suction motor.
SUCTION Increase suction
CONTROL Increase for upholsteries
_ Suction and carpets.
Decrease suction
Decrease for draperiesand
Suction lightweight rugs.
DIRT SENSOR
Thedirt sensor islocated onthe floor brush.
When the vacuumcleaner isin use,withthe
switchin the CARPETposition,the blue light
will come on as dirt isbeing vacuumed.As
longas the light ison, dirt ispassingthrough
the handle to indicate that the surfacestill
needscleaning.
When the sensorlight turns off, the sensoris
notseeingenoughdirt to warrant further
cleaning of that area.
Dirt
Sensor_.___
TO CLEANDIRTSENSORLENSES
Thedirt sensorlensesare located on the
insideof the floor brush. These lensesshould
be cleaned periodically.
1.Removefloor brush from nozzle.
2. Turnfloor brush upside down.
3. The two dirt sensor lensesare located on
the inside of the opening as shown. Brush
each sensor lensseveral times to remove dust
and dirt.
__ irt Sensor
Lenses
,_ CAUTION
Never use water or any cleaning solution
when cleaning the lenses. The residueof
the water or cleaners will accelerate the
recoating of the lensesand make cleaning
necessary sooner.
-16-
Loading ...
Loading ...
Loading ...