Loading ...
Loading ...
Loading ...
instantpot.com.au| 39
Care, cleaning and storage
Steam release handle
Remove the steam release handle
Pull the steam release handle up and off
the steam release pipe.
The steam release handle must be
installed before using the multicooker.
Install the steam release handle
Place the steam release handle on the
steam release pipe and press down firmly.
The steam release handle sits loosely on
the steam release pipe when installed
properly but should remain in place
when the lid is turned over.
Anti-block shield
Remove the anti-block shield
Grip the lid like a steering wheel and use
your thumbs to press firmly against the
side of the anti-block shield (pressing
towards the side of the lid and up) until
it pops off the prongs underneath.
Install the anti-block shield
Place the anti-block shield over the prongs
and press down until it snaps into position.
Do not attempt to operate the multicooker
without the anti-block shield installed.
Install
Remove
Illustrations in this document are for reference only and may differ from the actual product.
Always refer to the actual product.
Loading ...
Loading ...
Loading ...