Loading ...
Loading ...
33
www.jbl.com
English
For Products That Transmit RF Energy:
(i) FCC AND IC INFORMATION FOR USERS
This device complies with Part 15 of the FCC rules and Industry
Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) This device may not cause
harmful interference; and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
(ii) FCC/IC Radiation Exposure Statement
This equipment complies with FCC and ISED radiation exposure
limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm
between the radiator & your body.
In case this equipment has to subject to FCC/IC SAR (Specic
Absorption Rate) exposure test, this equipment is designed to
meet the requirements for exposure to radio waves established
by the FCC and ISED. These requirements set a SAR limit of
1.6 W/kg averaged over one gram of tissue. The highest SAR
value reported under this standard during product certication
for use when properly worn on the body or on the head, with
no separation. To meet RF exposure guidelines and reduce
exposure to RF energy during the operation, this equipment
should be positioned at least this distance away from the body
or the head.
For radio equipment operates in
5150-5850MHz
FCC and IC Caution:
High power radars are allocated as primary users of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations
can cause interference with and/or damage to LE LAN (Licence-
Exempt Local Area Network) devices. No conguration controls
are provided for this wireless equipment allowing any change in
the frequency of operations outside the FCC grant of authorization
for US operation according to Part 15.407 of the FCC rules.
IC Caution:
User should also be advised that:
(i) The device for operation in the band 5150 - 5250 MHz
is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems; (ii) the
maximum antenna gain permitted for devices in the bands
5250 - 5350 MHz and 5470 - 5725 MHz shall comply with
the e.i.r.p. limit: and
(ii) The maximum antenna gain permitted for devices in the
band 5725 - 5825 MHz shall comply with the e.i.r.p. limits
specied for point-to-point and non point-to-point operation
as appropriate.
Use Restriction Attention in European Union, operation is limited
to indoor use within the band 5150-5350 MHz.
Correct disposal of this product (Waste Electrical & Electronic
Equipment)
This symbol means the product must not be discarded as
household waste, and should be delivered to an appropriate
collection facility for recycling. Proper disposal and recycling helps
protect natural resources, human health and the environment.
For more information on disposal and recycling of this product,
contact your local municipality, disposal service, or the shop
where you bought this product.
This product is RoHS compliant.
This product is in compliance with Directive 2011/65/EU and UK
The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012, and its
amendments, on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
REACH
REACH (Regulation No 1907/2006) addresses the production
and use of chemical substances and their potential impacts
on human health and the environment. Article 33(1) of REACH
Regulation requires suppliers to inform the recipients if an
article contains more than 0.1 % (per weight per article) of any
substance(s) on the Substances of Very High Concern (SVHC)
Candidate List (‘REACH candidate list’). This product contains
the substance “lead”(CAS-No. 7439-92-1) in a concentration of
more than 0.1% per weight.
At the time of release of this product, except for the lead
substance, no other substances of REACH candidate list are
contained in a concentration of more than 0.1% per weight in
this product.
Note: On June 27, 2018, lead was added to the REACH candidate
list. The inclusion of lead in the REACH candidate list does not
mean that lead-containing materials pose an immediate risk or
results in a restriction of permissibility of its use.
For devices with headphone jacks
WARNINGS/CAUTIONS
Do NOT use the headphones at a high volume for
any extended period.
- To avoid hearing damage, use your headphones
at a comfortable, moderate volume level.
- Turn the volume down on your device before
placing the headphones on your ears, then
turn the volume up gradually until you reach a
comfortable listening level.
Loading ...
Loading ...
Loading ...