Loading ...
Loading ...
2
Wet Sounds HTX Series Owner’s Manual
INSTALLATION INSTRUCTIONS
Wet Sounds Marine Ampliers are designed for easy installation in your boat. To
ensure proper installation of your new purchase please follow all the suggestions
listed below. If you do not have experience with marine electrical and
mechanical systems contact a professional installer. Paying a qualied
installer is almost always cheaper than paying a dealership to repair your
boat.
LOCATING THE AMPLIFIER
The amplier must be securely mounted to a solid surface. Please select a
dry location to mount your amplier. All Wet Sounds products are designed to
operate in humid environments however direct contact with water can damage
the electronics. Do not mount the amplier to any area that may have excessive
vibration (like a subwoofer enclosure). Position the amplier in an area that
receives sufcient airow for proper heat dissipation.
SUPPLYING ENOUGH POWER
Your amplier does NOT make power; it converts power, or current, from your
boats electrical system and converts it into high power musical energy. If the amp
can’t get all the power it needs it will not produce its full output. Your Wet Sounds
amplier will produce full output longer than other amplies on the market today.
Should your voltage or current drop too low the amplier will drop below the rated
output. Make sure your boats charging system is in good working order. Any high
performance audio amplier will increase the demand on your alternator and
battery. If you are unsure have you charging system checked system testing by a
professional technician.
Loading ...
Loading ...
Loading ...