Loading ...
Loading ...
Loading ...
9
Operation
WARNING: This electric
rebox must be properly installed
before it is used.
Manual Controls
The manual controls for the
replace are located in the lower
right hand corner (Figure 2).
A. Main On/Off Switch
Supplies power to the 3-Position
Switch.
B. 3-Position Switch
• Remote (right position):
The unit is operated with the
Figure 2
remote control.
• Flame (center position):
The ame effect is turned on.
• Flame & Heat (left position):
The ame effect and heater
are turned on simultaneously.
When the manual control is
in the Flame & Heat position
the heater does not run on
the remote operated thermo-
stat.
!
NOTE: When the manual con-
trol switch is in the Flame and
Flame & Heat positions, the
replace unit will not operate
with the remote control.
C. Initialization Button
Used to synchronize the supplied
remote control with the replace.
!
NOTE: The heater on your
replace may emit a slight,
harmless odor when rst used.
This odor is a normal condition
caused by the initial heating of
internal heater parts and will
not occur again.
Resetting The Temperature
Cutoff Switch
Should the heater overheat, an
automatic switch will turn the
heater off and it will not come
back on without being reset. The
A
B
C
Loading ...
Loading ...
Loading ...