Loading ...
16
low
medium
high
3. The lights start ashing in sequence;
4. Press the button corresponding to the required
temperature:
low medium high
5. The button ashes to indicate that the selection has
been saved.
The appliance exits the menu and is ready for use.
4.2 Setting water hardness
The light (B7) indicating that the coee maker needs descaling
comes on after a period of operation established according to
water hardness.
The appliance can also be programmed according to the hard-
ness of the mains water in the various regions so that descaling
needs to be performed more or less frequently.
Proceed as follows:
1. Access the settings menu;
2. Press the button to enter the water hardness selec-
tion mode. The lights corresponding to the current selec-
tion come on:
soft
medium
hard
3. The lights start ashing in sequence;
4. Press the button corresponding to the water hardness in
your area:
soft water
medium
water
hard water
<10°dH 10°dH - 20°dH >20°dH
<18°fH 18°fH - 36°fH >36°fH
<180mg/l CaCo
3
180-360mg/l CaCo
3
>360mg/l CaCo
3
- The button ashes to indicate that the selection has
been saved.
The appliance exits the menu and is ready for use.
4.3 Adjusting auto-o (stand-by)
To save energy, an auto-o function turns the appliance o
when not used for a long period. To turn it back on again, press
any button on the control panel.
1. Access the settings menu;
2. Press the button to enter the auto-o time selection
mode. The lights corresponding to the current selection
come on:
9 min
30 min
3 hours
3. The lights start ashing in sequence;
4. Press the button corresponding to the required time:
9 min 30 min 3 hours
5. The button ashes to indicate that the selection has
been saved.
The appliance exits the menu and is ready for use.
4.4 Default values (reset)
This resets all menu settings and programmed quantities back
to the default values.
To reset the default values, proceed as follows:
1. Position the steam spout over the drip tray;
2. Access the settings menu;
3. Turn the steam dial to the position;
4. Press the button. The three lights ash simulta-
neously to conrm that the original settings have been
restored.
5. The and lights ash to indicate that the
steam dial must be closed again (
○
symbol).
When the steam dial has been closed, the appliance is ready for
use.
5. HOW TO MAKE ESPRESSO COFFEE
5.1 Tips for a hotter coee
For hotter espresso coee, you should:
• You are recommended to warm the cups before making
coee by rinsing them with a little hot water.
• Attach the lter holder to the appliance with the lter in
place but without adding coee. Using the same cup
as will later be used to make the coee, press the 1 cup
button and deliver hot water into the cup to heat it.
• Raise the coee temperature in the settings menu.
Loading ...
Loading ...
Loading ...