Loading ...
Loading ...
Loading ...
- 6 -
Please place the appliance in a horizontal position. Please do not use the appliance in high temperature and
humidity (bathroom, kitchen).
Avoid blocking the air inlet and air outlet when the product is in use. Please keep the product far away from
curtains.
Do not place anything within 1 meter in front of the air outlet to ensure that the airflow would not be
reduced.
1. Insert the plug into a suitable power outlet. Press the power switch to position “I“. The appliance is in standby
mode.
2. To turn on and off:
Press the on/off button on the control panel the buzzer will beep once and the appliance will start running.
Press and hold the on/off button for about 2 seconds, the buzzer will beep twice and the appliance will stop
running. Press the on/off button for about 5 seconds, the buzzer will beep three times and the appliance
enters into Wi-Fi pairing (see the section “”).
3. To set the oscillation function:
Press and hold the on/off buton on the control panel for 1 second the buzzer will beep once and the
appliance will start oscillating. Press and hold the on/off button for 1 second again the buzzer will beep once
and the appliance will stop oscillating.
The appliance starts working in cool mode by default; it sends out the cool air. Press the on/off button on the
control panel, you can adjust the air volume from 1 to 9 under cool mode. To switch to the warm mode, or use
more functions, please refer to below paragraphs and operate by the control panel or smart phone (after WiFi
connected).
When the appliance runs in warm mode, the air duct will become hot. Shortly after the appliance is
turned off, the air duct may still be too hot to touch.
The air duct angle can be adjusted. Before the adjustment, make sure the product is turned off. Hold the
main body with one hand, push the air duct with another hand forward or backward in 15 degrees.
Keep a distance
Loading ...
Loading ...
Loading ...