Loading ...
Loading ...
Loading ...
- 10 -
device. Then press “Done” at the top right corner.
7. Now you can operate the appliance in the interface below. Press the corresponding button to set your
appliance. Check the illustrations below.
a. Appliance name
b. Back to home page: press it, you can get back to the
home page, on which you can simply turn on or turn
off your appliance.
c. More settings: press it, you can have more settings.
The option “Share Device” allows you to share the
operation of the appliance to other people.
d. Mute button: press it to set the operation with or
without beep sounds
e. Air volume selection bar: move the round logo on the
bar to select a desired air volume. When the warm
mode is selected, the warm air volume has 4 levels to
adjust. When the warm mode is not selected, if none
of the max mode, sleep mode and fresh mode is
selected, the cool air volume has 9 levels to adjust, if
any of the max mode, sleep mode and fresh mode is
selected, the air volume adjustment is not supported.
f. Display of air volume level
g. Display of current room temperature
h. Set temperature
i. Temperature decreasing button (only active in warm
mode)
j. Temperature increasing button (only active in warm
mode)
k. On/off button: press it to turn on/off the appliance. (“off” means the standby state)
l. Oscillation button: press it to choose the function or not
m. UV sterilization button: press it to choose the function or not
n. Timer setting: press it to select the working hours
o. Max mode button: press it to choose the function or not
p. Sleep mode button: press it to choose the function or not
q. Fresh mode button: press it to choose the natural wind or not. This is a function available only by APP
control, no such button on the remote control.
r. Warm mode button: press it to choose the warm mode or not
:
For the detailed explanation of the same functions, please refer to the “Remote control” section.
To choose the max mode, sleep mode or fresh mode (only one mode can be chosen at one time), the warm
mode should be cancelled first.
The button will light in green when the corresponding function is chosen.
When the network environment for the appliance has been changed, it requires to be reconfigured.
To make the appliance enter into Wi-Fi pairing mode, long press the on/off button on the control panel until
buzzer beeps three times and the Wi-Fi indicator light rapidly blinks.
When the Wi-Fi indicator light rapidly blinks, the appliance is waiting to be paired. When the Wi-Fi indicator
light illuminates still, the appliance has been connected to the Wi-Fi.
Loading ...
Loading ...
Loading ...