Loading ...
Loading ...
Loading ...
I FU_,_CT/ONS
SOFTWARE UPDATE
Samsung may offer updates for the Soundbar's
system firmware in the future_
If an update isoffered, you can update the firmware
by connecting a USBdevice with the firmware
update stored on it to the USBport on your
Soundbar_
Note that if there are multiple update files, you must
load them onto the USBdevice singly and use them
to update the firmware one file at a time_
Pleasevisit samsung_com or contact the Samsung
carl center to receive more information about
downloading updates files_
Insert a USBdevice containing the
firmware update into the USBport on the
main unit_
Updating firmware may not work properly
if audio files supported by the Soundbar
are stored in the USBstorage device_
Do not disconnect the power or remove
the USBdevice while updates are being
applied_ The main unit will turn off
automatically after completing the
firmware update_
After the update, all settings are resetto
their factory default settings_We
recommend you write down your settings
so that you can easilyresetthem after the
update_ Note that updating firmware
resetsthe subwoofer connection too_
If connection to the subwoofer is not
re-established automatically after the
update, refer to page 14_
If the firmware fails to update, we
recommend formatting the USBdevice in
FAT16and trying again_
• Once the software update iscompleted,
turn off the product and then pressand
hold the ( b,II) button on the remote
control for more than 5 seconds_"iNJT_
appears on the displayand the unit is
powered offl The updgrade iscomplete_
• Do not format the USBdevice in the NTFS
formal The Soundbar does not support
the NTFSfile system_
• Depending on the manufacturer, some
USBdevices may not be supported_
AUTO POWER UNK
_fyou have connected the main unit to a TV with
a digital optical cable, set the Auto Power
function ON to have the Soundbar turn on
automatica!ly when you turn the TV on.
AUTOPoWER
LINK DisPlay
ANYNET+ OFF/
ON
POWERLiNK ON
ANYNET+ ON /
OFF
POWERUNK OFF
1. Connect the Soundbar and an External Device
with an Optical cable_
2. Pressthe _ (Function) button on the main
unit's top panel or the SOURCEbutton on the
remote control to select the DJN mode_
3° Pressthe Anynet+ button on the remote
control to toggle the Auto Power Link function
on and off.
• Depending on the connected device,
Auto Power Link may not function_
22
Loading ...
Loading ...
Loading ...