Loading ...
Loading ...
Loading ...
I CO_tECT/O_S
CONNECTIONS
CONNECTING THE W_RELESS SUBWOOFER
The Subwoofer's linking ID ispreset at the factory and the main unit and subwoofer should link (connect
wirelessly)automatically when the main unit and subwoofer areturned on_If the Linkindicator ( _, ) does not
light when the main unit and subwoofer are turned on, pleaseset the ID by following the procedure below_
1. Plugthe power cords of the main unit and
subwoofer into an ACwall outlet_
2. Pressthe mDSETbutton on the back of the
subwoofer with a small, pointed object for
5 second£
o The STANDBYindicator isturned off and the
LINKindicator (Blue LED)blinks quicHy_
S. While the main unit is powered off (in STANDBY
mode), pressand hold the _ (Mute) on the
remote control for 5second£
4. The mDSETmessageappears on the Soundbar's
display_
5. Tofinalize the link, turn the main unit's power on
while the subwoofer's Blue LEDblink£
o The main unit and the subwoofer should now
be linked (connected)_
. The Link indicator (Blue LED)on the
subwoofer should be on_
If the Linkindicator is not solid blue, the
linking process has failed_Turn off the main
unit and start again from Step 2_
. You can enjoy better sound from the wireless
subwoofer by selecting a Sound Effect_
(Seepage 10)
• Before moving or installing the product,
be sure to turn off the power and
disconnect the power cord_
• Ifthe main unit ispowered off, the
wireless subwoofer will be in standby
mode and the STANDBYLEDon the upper
side will come on after the Link indicator
(Blue LED)blinks for 30 second£
• Ifyou use a device that usesthe same
frequency (2_4GHz) asthe Soundbar near
the Soundbar, interference may cause
some sound interruption_
• The transmission distance of the wireless
signal between the main unit and
subwoofer isabout 33 ft, but may vary
depending on your operating
environmen£ If a steebconcrete or metallic
wall is between the main unit and the
wireless subwoofer, the system may not
operate at all, because the wireless signal
cannot penetrate metal_
• Ifthe main unit doesn't make a wireless
connection, follow steps 1-5 in the left
hand column to re-setthe connection
between the main unit and wireless
subwoofer_
The wireless receiving antenna is built into
the wireless subwoofer_ Keepthe unit
away from water and moisture_
Foroptimal listening performance, make
surethat the area around the wireless
subwoofer location isclear of any
obstruction£
14
Loading ...
Loading ...
Loading ...