Loading ...
Loading ...
Loading ...
10
Operation
English
To operate the inverter, turn it on by pressing the ON/OFF switch. The inverter is now ready to
deliver AC power to your loads. If you are loading several appliances, turn them on separately
after the inverter switch is on, this process is to avoid the power inverter from delivering the
starting current all at once to the loads.
The inverter can operate with and without being connected to a nominal 12V DC battery source
by using the bypass AC input mode. Plugging the attached AC power cord into a 120V power
source will result in an automatic bypass of the 12V DC power source. Disconnecting the 120V
input source will automatically transfer back to the nominal 12V DC source.
Controls and indicators
1
Yellow LED Indicates the inverter is activated.
2
Green LED Indicates the bypass AC input is activated.
3
Red LED Indicates the inverter is with overloading, over temperature,
low battery voltage, over battery voltage or output short circuit.
4
Green LED Indicates the inverter is operating normally.
2
1
3
4
NOTE: Press the ON/OFF button to restore when an error is encountered.
Loading ...
Loading ...
Loading ...