Loading ...
Loading ...
Loading ...
REMOVABLE OVEN RACKS
BUMPED-IN
RACK GUIDES
Be careful not to scratch the oven finish when
installing or removing over= racks.
To install:
1o Set the raised back edge ofthe rack on a pair of rack
guides.
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack and push the rack
all the way tn.
To remove;
1oPull the oven rack out, then upo
HOTE:
The racks are designed with stop locks. When
the racks are placed correctly on the rack sup.
port and extended from the oven, the stop lock
prevents the racks from til_ing when you are
removing food from the racks or placing food on
them.
REMOVABLE OVEN DOOR
BROIL STOP
POSITION
/
/
To remove=
1_ Open the door to the stop position (see illustrati_
2. Grasp the door at each side and lift up and oI! th,
hinges° DO NOT lift the door by the handle.
NOTE: When the door is removed and hinge arrn_
are at stop position, do not bump or try to move
the hinge arms. The hinges could snap bacl_
causing an injury to the hands or damage to the
porcelain on the front of the range. Cover the
hinges with toweling or empty towel rolls while
working in the oven area.
To replace_
1, Hold the door over the hinges with the slots at tile
bottom edge of the door lined up with the hinges
The hinge arms must still be in the stop
position.
2. Slide the door down onto the hinges as tar as it wifl
go and close the door.
This drawer gives you space for keeping
cookware and bakeware. Plastics and flammable
material should not be kept in this dr_:-_er=
Do not overload the storage drawer. If the drawer is too
heavy, itmaystipoffthetrackwhenopened. Toopenthe
drawer, grasp the center of the handle and pull straighl
ouL
To remove: Pull drawer straight out and lift over the
guide stops,
To replace= Lift over the guide stops and slide drawer
into place.
18 NEMNT104
Loading ...
Loading ...
Loading ...