Loading ...
Loading ...
Loading ...
EN
27
Functions and operation
www.bora.com
Setting the temperature on the Tepan stainless
steel grill PKT3
XX
Turn the knob ring to the desired temperature.
XO
The control knob display shows the target temperature for 3
seconds. Then the warm-up phase begins.
XO
During the warm-up phase, the corresponding cooking zone
display flashes and the current temperature is shown.
XO
As soon as the target temperature is reached, the warm-
up phase comes to an end and the target temperature is
continuously displayed.
6.5.4 Cooktop power setting
When the power setting is activated, maximum cooking zone
power is available for a predefined time.
i
For this reason, on the cooktops PKFI3 and PKI3, the
max. power of the other cooking zones is automatically
and temporarily reduced.
i
Never heat up oil, fat and the like on this power setting.
The bottom of the pan can overheat due to the high
power output.
i
The power setting cannot be activated if the bridging
function is switched on (exception: Tepan stainless steel
grill PKT3).
i
If a cooking zone on the cooktops PKFI3 and PKI3 is
operated on the power setting, the second cooking zone
can be operated on power level 5 at most.
i
If a higher level than 5 is set on the second cooking zone
when the power setting is activated on the cooktops
PKFI3 and PKI3, the level will automatically be reduced to
power level 5.
i
If a power level higher than 5 is set for the second
cooking zone on the cooktops PKFI3 and PKI3, the
active power setting on the first cooking zone will be
automatically switched back to the previous level.
i
On the cooktop PKCH3 the power setting corresponds to
the Hyper setting.
Activating the power setting for a cooking zone
XX
Turn the knob ring clockwise to power setting
P
(
240
–
250
°C on the Tepan stainless steel grill).
i
After 10 minutes, the power setting is automatically
switched back to power level 9 (
230
°ContheTepan
stainless steel grill).
Deactivating the power setting early
XO
Setting another power level for the cooking zone with the
power setting active
XO
Setting a higher power level than 5 for the other, second
cooking zone (only on cooktops PKFI3 and PKI3)
6.5.2 Special operating instructions for the
Tepan stainless steel grill PKT3
Initial operation
XX
Heat the griddle to 220°C for approx. 25 minutes before
using it for the first time (both grilling zones).
i
Bothersome odours may be emitted during this process.
Operating instructions
i
The grilling zones should be preheated 5 minutes before
use.
i
During heating or cooling the griddle may make some
noise. This is a normal occurrence.
i
A fan is built in to the Tepan stainless steel grill for
cooling, guaranteeing a long service life for the electronic
components and rapid cooling of the grill surface.
Different measures have been taken to keep noise to a
minimum, but it cannot be completely avoided.
i
During use, the griddle may show signs of curvature.
i
During grilling or heating on a high power level, the
griddle may adopt a light brown colour.
6.5.3 Setting cooking zone power levels
The power levels are controlled by turning the knob ring to the
desired power level (electronic power adjustment).
Fig. 6.23 Setting cooking zone power levels
XO
The selected power level is shown in the power display on the
control knob that has been touched.
Increasing the power level
XX
Turn the knob ring clockwise
Reducing the power level
XX
Turn the knob ring anticlockwise
i
If after setting a power level on induction cooktops PKFI3,
PKI3 and PKIW3 no suitable cookware is detected (pan
size recognition) within 10 minutes, the corresponding
cooking zone will be automatically switched off.
Loading ...
Loading ...
Loading ...