Loading ...
Loading ...
Loading ...
Ventilation
Air inlet vent position
Airflow through the cupboard
B
D
Cool air IN
Warm air
OUT
Door outlet vent
1. Drill four pilot holes 12mm
dia.
2. Finish the cutout using a
jig saw and keyhole or Wall
Board saw
If the air flow, using the silicon door buffers, is insufficient, it will be necessary to fit a standard HydroTap vent kit, which ensures
heat dissipation through natural convection via installed vents.
For high use applications, where the cupboard space temperature is near 35°C, or higher, the inlet vent (See Item B below) and
silicon buffers, need to be fitted. If the airflow is still insufficient to maintain normal operating temperatures then the inlet vent and
door outlet vent (See item D below) will need to be fitted.
Alternatively a fan kit may be installed, using the AUX din plug of the right hand side of the appliance (Contact your local service
centre for availability).
Note: The vent kit has to be installed in a way that allows air to be drawn in from the bottom of the cupboard and expelled through
the top of the cupboard. Therefore placement of the outlet vent should be towards the top of the door or on the side of the
cupboard.
2.2 The following instructions are critical if there is insufficient cupboard air circulation.
Cutout details
Page 8 of 20 Installation & Operating Instructions - 89914 - Zip ChillTap Sparkling - Jan 2016 v1.04
Loading ...
Loading ...
Loading ...