Loading ...
Loading ...
Loading ...
The operationof any lawn mower can result in
foreign objects thrown into the eyes, which can
result in severe eye damage. Always wear
safety glasses or eye shields while operating
your lawn mower or performing any adjust-
ments or repairs. We recommend a wide
vision safety mask overspectacles or standard
safety glasses.
HOWTO USEYOUR LAWN MOWER
ENGINE SPEED
TO OPERATE DRIVE SYSTEM
With engine running, select ground
speed by moving speed control lever to
desired position.
To start forward motion, pull drive
control bar back against handle.
To stop forward motion, release drive
control bar.
IMPORTANT: Always keep drive control
bar fully engaged against handle when in
The engine speed was set at the factory for use.
optimum performance. Speed is not adjust-
able.
ENGINE ZONE CONTROL
ACAUTION: Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the risk
of blade contact injury. Do not under any
circumstances attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
Your lawn mower is equipped with an Drivecontrol
operator presence control bar which engaged
requires the operator to be positioned "
behind the lawn mower handle to start and
operate the lawn mower.
TO ADJUST CUTTING HEIGHT
All four wheels are adjusted by a single
lever.
Pulladjuster lever toward wheel. To raise
mower, move lever forward to desired
position.To lower mower, move the lever
toward the rear.
Lower Wheels for high cut
Wheel \
A_juster
Lever J
Raise Wheels for low cut
GROUND DRIVE SPEEDS
Your lawn mower provides multiple speeds
to let you select the speed that suits you
best.
Lower speeds are for slow, heavy/thick
grass cutting or trimming.
Medium speeds are for normal grass
cutting or trimming.
High is for light cutting and for ground
transport.
NOTE: Do not move speed control lever
unless the engine is running
Speed control
lever
Operator presence
control bar
Drive control
disengaged
TO CONVERTMOWER
Your lawn mower was shipped ready to be
used as a mulcher. Toconvert to begging or
discharging:
REAR BAGGING-
, Open rear door and remove mulcher plug.
Store mulcher plug in a safe place.
To convert to mulching or discharging
operation, install mulcher plug into rear
discharge opening of mower.
SIDE DISCHARGING-
Rear door must be closed.
Open mulcher door and installdischarge
deflector under guard as shown.
Mower is now ready for discharging
operation.
To convert to mulching or bagging
operation, discharge deflector must be
removed and mulcher door must be
dosed.
7
Loading ...
Loading ...
Loading ...