Loading ...
Loading ...
Loading ...
INSTALLATION 13
Removing/Assembling the
Freezer Drawer Handle
Removing the Handle
1 Loosen the set screws D located on the
lower side of the handle with a 1/sin. Allen
wrench and remove the handle.
Loosen the mounting fasteners _ that
connect to the
freezer drawer
and handle
using a//_ in,
Allen wrench,
and remove
the mounting
fasteners,
Assembling the Handle
1 Assemble the mounting fasteners D at
both ends of the handle using a 1/4in. Allen
wrench.
2 Place the handle on the door by fitting
the handle
footprints over
the mounting
fasteners and
tightening the
set screws
with a//8 in.
Allen wrench.
FZ_ WARNING
When assembling or disassembling the
handle:
Grasp the handle tightly to avoid dropping it.
• Do not swing the handle into nearby people
or animals.
• Make sure that the bracket hole of the
handle fits properly into the stopper bolt of
the door. Assemble the set screws to fix
the handle into place.
• Make sure that there is not agap between
the door and handle after assembling the
handle.
Removing/Assembling the
Doors and Drawers
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
FZ_ WARNING
• If your entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
• Use two or more people to remove and
install the refrigerator doors. Failure to do
so can result in back or other injury.
• Disconnect the electrical supply to the
refrigerator before installation. Failure to do
so could result in serious injury or death.
• Do not put hands, feet or other objects into
the air vents or bottom of the refrigerator.
You may be injured or receive an electrical
shock.
• Be careful when handling the hinge and
stopper. You may be injured.
• Remove food and bins before detaching the
doors and drawers.
Loading ...
Loading ...
Loading ...