Loading ...
Loading ...
Loading ...
Page 7
STACKING THE
TRAYS
Before loading the trays with food
it is a good idea to make sure
that they are all aligned correctly
by stacking them up near the
preparation area. The indented side
of the tray is always at the top.
Trays have alignment arrows cast
into the handle. The arrows should
be visible on top of the tray handles.
Incorrectly stacked trays will hinder
the drying process.
Once the trays are all correct
side up you can stack them in
two different ways. Depending
on the thickness of the food you
can change the stacking height
by simply rotating a tray 180˚ to
change it to either tall or short
stacked.
Any combination of stacking can
be used to accommodate the foods
being dried. An example would
be a short tray stack for banana
chips and a tall tray stack for large
strawberries.
TO BEGIN USE
1. Safely place the appliance on a at
and level surface. Load and insert
the trays, then insert the plug into
the electrical outlet.
2. To adjust the temperature press
the “TEMP” button and select
the temperature you require.
To change the temperature in
singular digits, press the button
without holding it in. To increase
the temperature rapidly, hold the
button.
3. Set the desired amount of time by
pressing and holding the “TIME”
button. The number displayed
in the digital display represents
the number of hours the
appliance will operate at before
automatically turning off. When
pressing the button, the digital
display will cycle from 1 hour
through to 48 hours then restart
at 1 again. Individual presses of
the button will advance the count
by one hour. Holding the button
will advance the time quicker.
4. Press the ON/OFF button to
begin the programmed cycle.
The colon in the timer display
will begin to ash indicating it is
running. The display shows the
remaining time of operation in the
format HH MM. You will also hear
the fan operating.
5. The appliance will stop
automatically when the time
expires or you can stop it any
time using the ON/OFF button.
Remove the plug from the outlet.
If you wish to add more time during
the cycle or if you want to change
SET UP & USE
Set the trays in
place so that all
the arrows on
the handles are
visible on the top
of the handles.
Loading ...
Loading ...
Loading ...