Loading ...
Loading ...
Loading ...
Escape 1800-I Insert Installation and Operation Manual
49
Then align the holes in the faceplate extension (M) with the holes in each faceplate side
panels and secure both assemblies together using four (4) bolts (D) and nuts (E) provided
(see DETAIL C) .
Center the insert into the fireplace opening.
Align the notch in the faceplate extension with
the bolt (N) welded to the air jacket located (see
DETAIL D) and slide the faceplate assembly
just over the bolt’s head and washer (O). Then
push towards the fireplace.
If necessary, adjust the height of the insert
using the leveling bolts on each side of the
convection air jacket until the faceplate is
properly seated on the floor of the hearth
extension.
Once the faceplate is in place, secure the
assembly by tightening nuts (P) using a 7/16"
(11 mm) open end wrench.
Loading ...
Loading ...
Loading ...