Loading ...
Loading ...
Loading ...
Page 10
OPERATION
ON/OFF SWITCH (FIG.2)
FIG. 2
On/Off Switch
1. To turn the tool on, push the on/off
switch forward.
2. To turn the tool off, pull the on/off
switch backward.
LED WORKLIGHT (FIG.3)
FIG. 3
LED Worklights
The LED worklights, located on the front
of the multi-tool, provide additional
light on the surface of the workpiece
for operation in lower-light areas. The
LED worklights will illuminate when
the switch is pushed forward. The LED
worklights will turn off when the switch
is pulled backward.
VARIABLE-SPEED DIAL
(FIG.4)
FIG. 4
Variable - Speed Dial
The variable-speed feature on this multi-
tool allows you to match the proper speed
to the material being cut, sawed, scraped,
or sanded, thereby enhancing the overall
performance of your tool and helping to
save the accessory from undue wear.
The variable-speed dial is used to adjust
the speed of the accessory . Turn the dial
to increase or decrease the speed of the
tool. Position “1” selects the slowest speed;
position “6” selects the fastest speed.
Adjust the speed for optimum performance.
Loading ...
Loading ...
Loading ...