Loading ...
Loading ...
Loading ...
E-7
Turni
ng Unit Power On and Off
- To Turn ON the unit, press the PLAY/PAUSE button, LCD display will be on and
then read the inserted disc after display “60 SEC” anti-skip message. If no disc is
inserted or the inserted disc has an error, the display will show “disc”.
- To Turn OFF, in CD stop mode, press STOP button once, display will go off. In CD
playing mode, press STOP button twice will also turn off the power.
NOTE: When the unit is stopped for approximately 30 seconds, the power will be
automatically turned off.
Play Mode
1. In power off mode, press the CD door OPEN switch to open the CD door.
2. Insert a CD with the label side facing upward and then close the CD door
.
3. Press the PLAY/PAUSE
button to turn on the unit. The display will show
“60 SEC”, total number of tracks and playing time in sequence and then start
to play first track automatically.
4. While playing, press the PLAY/PAUSE
BUTTON to pause, the elapsed
time will flash. Press PLAY/PAUSE
BUTTON again to resume playing
5. Rotate the VOLUME CONTROL KNOB to adjust volume level.
6. Press the STOP
BUTTON to stop playing.
7. Press the STOP
BUTTON again to turn the unit off.
NOTE: Do not open the CD DOOR when a CD is playing.
To Enhance the Bass Sound
• Set the BBS switch to the ON position.
NOTE: The bass boost performance
will be increase or decrease depending on the
volume level.
LCD DISPLAY INFORMATION
At initial start up
• The display will show “60 SEC” then “- -“ and then the total number of tracks
and total playing time. The disc will start playing and the display will show the
first track number & instant playing time.
• To review the total number of tracks and total playing time of the disc, press
the STOP
button once.
During PLAY mode
• The track number and the elapsed time are displayed.
During PAUSE mode
• When the track playback is paused, the elapsed time flashes.
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...