Loading ...
Loading ...
Loading ...
INFORMATION ON SIZE CAPACITY OF PROPANE GAS CYLINDERS:
The chart below shows the number and size
of propane tanks needed to run this heater.
*Less gas is vaporized at lower temperatures.
You may need two or more 100 pound (45
kg) tanks or one larger tank in colder weather.
(See the parts list for your model of heater
to get the specied regulator assembly.)
THE PROPANE (LP) GAS TANK
MUST ALSO BE EQUIPPED
WITH THE FOLLOWING:
• A collar to protect the Propane gas valve.
• A shutoff valve terminating a Propane gas
cylinder valve outlet as specied in the
• American National Standards for
Compressed Gas Cylinder Valve Outlets
and Inlet Connections.
• A safety relief valve having direct
communications with the vapor space of
the tank.
• An arrangement of vapor withdrawal.
The propane (LP) gas pressure regula-
tor and hose assembly supplied with
this heater must be used without alteration.
The hose assembly shall be visually in-
spected prior to each use of the heater. If it
is evident that there is excessive abrasion
or wear, or the hose is cut, it must be re-
placed prior to the heater being put into op-
eration. The replacement hose assembly
shall be that specied by the manufacturer.
Temperature
(°F-°C) at tank
Number of Tanks
36,000-60,000
BTU/h
Above
32°F (0°C)
1 - 20lb (9kg)
32°F (0°C) 1 - 20lb (9kg)
20°F (-7°C) 1 - 20lb (9kg)
10°F (-12°C) 1 - 20lb (9kg)
-10°F (-23°C) 2 - 20lb (9kg)
-20°F (-29°C) 1 - 100lb (45kg)
Page 7
Loading ...
Loading ...
Loading ...