Loading ...
Loading ...
Loading ...
BATTERY INSTALLATION AND REMOVAL INSTRUCTIONS
EXTENSION CORD ATTACHMENT
HEATER TILT ADJUSTMENT INSTRUCTIONS
To install the battery align it with the guide rails
on the Heater and push rmly until it clicks
into position. To remove the Battery, depress
the release Button and pull rmly outward.
To operate the Heater with 120V AC power
attach the female end of a 16 gauge, out-
door rated, three prong extension cord to
the socket located at the rear of the Heat-
er. Make sure the cord is fully inserted.
The Heater has two tilt angles, LOW and
HIGH as illustrated in Figure 3 and 3a. To
move the Heater to either of these positions
the TILT Buttons must be depressed simulta-
neously while the front leg is pulled/ pushed
into position. A clicking sound indicates
the front leg has been properly positioned.
FIG. 2
FIG. 3
FIG. 3A
Page 9
Loading ...
Loading ...
Loading ...