Loading ...
Loading ...
Loading ...
14
www.insigniaproducts.com
Turning on your TV for the
first time
The first time you turn on your TV, the Plug & Play
wizard opens. The Plug & Play wizard guides you
through setting up basic settings including the
menu language, TV signal source, the channel list,
and time.
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See
page 8 for details.)
• Connected an antenna, cable TV, or satellite
TV. (See pages 10 through 11 for details.)
• Connected the power cord. (See page 9 for
details.)
2 Press (power). The Plug&Play introduction
screen appears.
3 Press ENTER. The Sets the menu language menu
opens.
4 Press ENTER to access the menu, then press
or to highlight a language. You can select
English, French, or Spanish.
5 Press ENTER. The Select Home Use when
installing this TV in your home screen appears.
6 Press or to highlight Home Use, then press
ENTER. The Select the Antenna source to
memorize screen appears.
7 Press or to highlight your TV signal source,
then press ENTER. You can select Air (antenna),
Cable (cable TV), or Auto (both antenna and
cable TV). If you have digital cable, select Auto.
8 If you select Cable, press or , or to
highlight the cable TV signal type, then press
ENTER. You can select STD, HRC, or IRC for
analog (antenna-based or without a cable box)
or digital signals. STD is the most common
setting. If you do not know which type of cable
TV signal you have, contact your cable TV
provider.
Note
You can also access these settings from the on-screen
menu.
Press MENU on the remote control, press or to
highlight SETUP, then press ENTER. Press or to
select Plug&Play, press ENTER, then press or to
select the setting you want to adjust.
Plug & Play
Menu Language, Store Demo, Channels, and Time will be set.
Start
Plug & Play
Sets the menu language.
Menu Language : English
Note
Store Demo mode is only intended for use in retail
environments.
If your TV is accidentally set to Store Demo mode,
reset the Plug & Play option. For more information,
see “Resetting the Plug & Play option” on page 38.
Select ‘Home Use’ when installing this TV in your
home.
Plug & Play
Home Use
Store Demo
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
Start
Start
Start
Loading ...
Loading ...
Loading ...