Loading ...
Loading ...
Loading ...
Operation
Installat
ion and User Instructions R01127
-
2 06
/11
Page 31
10.2.2 Water temperature
auxiliary heating
The water temperature achieved by
the auxiliary heating system depends
on the setting of the thermostat on:
- the cylinder AND
- the auxiliary / solar heating source
The adjustment at the cylinder is
carried out on the twin thermostat
fitted to the cylinder as shown in
Figure 14.
In the event that the high
temperature cut-out engages, it will
be necessary to manually reset the
thermostat. Use a suitable electrically
insulated tool to push the manual
reset button and inform the installer.
Figure 14: Adjustment water temperature auxiliary source
10.3 Maintenance
The maintenance of this
appliance must be carried
out by a suitably qualified
person only. It is
recommended to maintain
the unit on an annual basis.
Isolate all electrical
supplies from the unit
before commencing work.
Danger of electrical shock!
Dial to adjust water
temperature
Manual re
-
set
Loading ...
Loading ...
Loading ...