Loading ...
Loading ...
Loading ...
Page 9
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Intended use:
This tool is intended for the fastening and
loosening of bolts, nuts and various threaded
fasteners.
1. TO INSTALL AND REMOVE THE
BATTERY PACK. (NOT SUPPLIED)
Depress the Battery Pack Release Button (6)
rmly rst and then slide the Battery Pack out
from your tool. Slide the fully charged Battery
Pack onto the tool with sufcient force until it
clicks into position.(See Fig. A)
2.INSERTING A BIT HOLDER, SOCKET OR
SCREWDRIVER BIT.
Pull the collet locking sleeve(1) forward. Fully
insert the desired bit into the chuck and release
the collet locking sleeve (1).(See Fig. B)
Note: Try to pull the bit after releasing the collet
locking sleeve to make sure the bit is fully
locked in the chuck.
3. REMOVING A BIT HOLDER, SOCKET OR
SCREWDRIVER BIT.
Pull the collet locking sleeve (1) forward. Take
the bit out of the Chuck (2) and release the
collet locking sleeve (1).(See Fig. C)
4. REVERSIBLE
For drilling and screw driving use forward
rotation control (3) marked “
” (lever is
moved to the right). Only use reverse rotation
control (3) marked “
” (lever is moved to the
left) to remove screws or release a jammed drill
bit.(See Fig. D1, D2)
Warning: Never change the direction of
rotation when the chuck is rotating, wait until it
has stopped!
OPERATION
Fig. A
1
2
Fig. B
2
1
Fig. C
1
2
Loading ...
Loading ...
Loading ...