LAUNCHING THE SOFTWARE ON MAC COMPUTERS
(GO!BRIDGE SOFTWARE)
1 Connect the USB cable from one computer to the other. The
software detects the connection.
2 Click the EasySuite disc icon on the desktop of your Mac. If the
EasySuite CD icon is not on your desktop, launch Finder, then
select the EasySuite CD from the list of drives and folders on the
left.
3 Click the Go!Bridge software icon to launch the Mac version of the
software.
Notes:
• “Bridge is not running” is displayed if GO!Bridge (for Mac OS) or EasySuite (for
Windows OS) isn’t opened on either of the computers.
• For Mac OS 10.15, drag the GO!Bridge software icon to the desktop and click
to open.
GETTING STARTED
Follow the steps below to launch the software on each Windows or
Mac computer that you are connecting. For instance, if you connect a
PC to a Mac, follow the PC setup steps on your PC and the Mac setup
steps on your Mac.
LAUNCHING THE SOFTWARE ON WINDOWS PCS
(EASYSUITE SOFTWARE)
Connect the USB cable from one computer to the other. The software
detects the connection.
• Windows XP: The EasySuite software opens.
If it does not open, open My Computer as an Administrator,
select the drive letter of the EasySuite cable software, then
double- click the EasySuite icon.
• Windows 10, Windows 8.1, and Windows 7:
The Autoplay menu opens. Click Run EasySuite.exe, then click
Yes to allow the program to make changes. If Autoplay does not
open, open My Computer, select the drive letter of the EasySuite
cable software, then double-click the EasySuite icon.
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Caution
Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, maybe cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Canadian Notice
CAN ICES-3 (B)/NMB-3 (B)
Transferring multiple les using the Dock
You can collect les on the Dock in GO! Bridge, then drag them all
to the destination at once instead of transferring a single le.
To display les in the Dock, click the Dock icon.
TROUBLESHOOTING
Visit www.insigniaproducts.com for details.
PACKAGE CONTENTS
• Universal transfer cable
• Quick Setup Guide
FEATURES
• High-speed data transfer
• Windows-to-Windows compatibility
• Mac-to-Mac compatibility
• Windows-to-Mac (and Mac-to-Windows) compatibility
• Auto-launching software built into the cable. No CDs or
downloads required
SYSTEM REQUIREMENTS
• Windows® 10
• Mac OS 10.12, Mac OS 10.13, Mac OS 10.14, or Mac OS 10.15
• Intel® Pentium® II or higher/PowerPC G4 processor or later
• 512 MB RAM or higher
• At least 100 MB hard drive space available
• Available USB port on both computers
Before using your new product, please read these instructions to prevent any damage.
Dock icon
Transferring les between computers
When the EasySuite or GO!Bridge software opens, there will be two
windows, Local Host and Remote Host. Local Host is the computer
you are currently using. Remote Host is the computer you are
connected to via the cable. Both the EasySuite software and
GO!Bridge software allow you to transfer les using the same
techniques.
There are two ways to transfer les with EasySuite or GO!Bridge:
• Option 1: Select the le to be transferred on either the local or
remote computer, then drag and drop it into the destination
directly.
OR
• Option 2: Copy and paste the les to be transferred by selecting
the les using Ctrl+C, then pasting the les in the destination
folder using Ctrl+V, or by using the same commands on the Edit
menu.
Note: If you get an error message on your Mac system stating that you cannot
write les to a specic folder, then choose another folder that does not have
user restrictions. Or you may consult your operating system documentation on
how to modify write permissions on a certain folder.
V3 ENGLISH 19-0753
ONE-YEAR LIMITED WARRANTY
For complete warranty, visit www.insigniaproducts.com.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
QUICK SETUP GUIDE
PC/Mac USB File
Transfer Cable
NS-PU965XF/NS-PU965XF-C
Loading ...
