Loading ...
Loading ...
Loading ...
PelPro Pellet Stove • 7104-171C • 10/3/18pelprostoves.com
37
Listing and Code Approvals
Listings and Certications
Glass Specications
This Stove is equipped with 5mm ceramic glass.
Replace glass only with 5mm ceramic glass. Please contact PelPro for replacement glass.
Electrical Rating (On High)
PP130-B: 120 VAC, 60 Hz, Start 2.6 Amps,
Run 2.3 Amps
This manual describes the installation
and operation of the Brand PelPro,
Model PP130-B wood Stove.
This Stove meets the 2020 U.S.
Environmental Protection Agency’s
crib wood emission limits for wood
Stoves sold after May 15, 2020. Under
specic test conditions this Stove has
been shown to deliver heat at rates
ranging from 9,605 to 40,637 Btu/hr.
BTU & Eciency Specications
Emissions Report No. 0135PS041E
EPA Certicatin # 128-18
EPA Certied 0.53 grams / hr
*LHV Tested Eciency 87.5%
**HHV Tested
Eciency
81.9%
***BTU Output 9,605 - 40,667 / hr
****BTU Input 11,676 - 49,207 / hr
*****Heating Capacity
1,225 to 2,500 sq. ft.
depending on climate zone
Vent Size 3” or 4” L or PL
Hopper Capacity 130 lbs (Approximate)
Fuel Premium Wood pellets
Shipping Weight 265 lbs
2-1/2
[64]
4-1/2
[114]
24-1/2 [622]
36-1/2 [902]
24-1/2 [622]
22-3/4 [578]
8-1/4 [210]
AIR INLET
9-1/2 [241]
FLUE
Stove dimensions
*Weighted average LHV eciency using data collected during EPA emissions test.
**Weighted average HHV eciency using data collected during EPA emissions test.
***Maximum BTU output based on HHV eciency and the high burn section of the EPA emissions test.
****Maximum BTU input based on the high burn section of the EPA emissions test.
*****Heating capacity depencs on climate zone, structure layout, insulation, windows, etc.
Stove Dimensions
Loading ...
Loading ...
Loading ...